Original Furniture made with Boxes for living room

Creativity is what you have, that simple boxes can get to make a shelf, a table, and even a room divider. You do not believe it. For this DIY imaginative as we used pine boxes, Leroy Merlin, in three different sizes. They have never been rife both boxes!

3 Original Furniture made with Boxes

A shelf “diver” for the living room

a-shelf-for-living-room

It is cheerful, original and very, very practical. Copy this composition of boxes or try another … but leaves gaps between them and use them to save. The boxes below are better than large and above, medium or small. Try to place them horizontally or vertically, you will have great designing it!

BUY NOW ON AMAZON

 

Library and room divider

Library and room divider

They are nine boxes on one side … and seven other! You know all you can save in a cabinet like this? It is an authentic 2×1, room divider, and storage. The best thing about making your own combination of boxes is that you can adapt the space you have because you can make simple stack boxes or furniture grow sideways and upwards.

Where can you use it? In the hall (if at home you walk directly into the living room), in the bedroom to separate the dressing room and even in the bathroom to “hide” the toilet.

BUY NOW ON AMAZON

The foot is missing from your desktop

The foot is missing from your desktop

Why did not we thought of that before? A standing table boxes are both binder. Is not that great? The large boxes for magazines, catalogs, and large cabinets. As had the little background, we have merged two and we have removed the back. Small, for office supplies. Of course, as you save will be visible, choose beautiful accessories. Complete study corners with three boxes on the wall as a shelf. And the board … White and 3.4 cm thick (Ikea), rests on a wood strip screwed to the wall.

BUY NOW ON AMAZON

Screw the boxes it’s very easy

white-home-office-furniture-design

Although hit the boxes together, it is not more than keep your hands with screws. Start by screwing the board to the upper boxes.Put the board on the ground, upside down (on cardboard to avoid scratches), and go screwing the boxes to mount the entire foot.

BUY NOW ON AMAZON

Read this Article in: Français (French)

LEAVE A REPLY